XS212

The X-Line Very Compact Groundstack Rails feature 3 rigging attachment positions to allow for single or dual columns of X-Line Very Compact Loudspeaker Arrays to be Groundstacked and tilted to obtain the desired sound coverage. The3 rigging attachment positions allow for 2 options -Stack dual arrays; an XLD281 array at the front position and an XS212 subwoofer array at the rear position.Stack a single array of XLD281’s, XLE181’s, or a combination of XLD281’s and XS212’s at the middle position.

The XLD 281 is the core element for constructing X-Line Very Compact systems. The XLD281 is a 3–way design using CCT™ (Coverage Control Technology) to control horizontal coverage to 250Hz. It uses an 8" neodymium LF transducer, an 8" neodymium LF/MB transducer, and two neodymium 2" voice coil compression drivers combining through 2 hydra plane wave generators into a 120° x 10° waveguide. CCT uses both 8" transducers to provide maximum low frequency output and operating bandwidth while controlling horizontal beam width to 250 Hz by using DSP. The XLD281 can be used in tri-amp mode, or in bi-amp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD281 delivers full bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is simple to use and quickly provides uncompromised line array performance. Ground stacking is easily done using array rails or subwoofers as the array base.

The XLE181 is a 2-way design using the same 8” neodymium LF/MB transducer as the XLD281 and the same dual ND2S HF driver combination with a 120° x 10° waveguide coverage. With less than 18 kg (40lbs) per unit the XLE offers a powerful, very compact solution for sound reinforcement applications with limited space and/or load capacity. The XLE181 can be used in bi-amp mode or fullrange using a sophisticated internal passive network. Designed for the use in arrays of four and more elements, the XLE181 delivers full bandwidth audio with precise, predictable coverage control. The integrated rigging is simple to use and quickly provides uncompromised line array performance.

The P3000 delivers 1,800 watts per channel at two ohms. Neutrik Speakon® output connectors allow use of heavy-gauge speaker wire for low-loss connections. Extremely low dynamic distortion ensures excellent sound quality. Three-rack spaces.

Electro-Voice’s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg), it is both powerful and lightweight. The CP3000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's combination of reliability and pleasing, rich sound make it the the first choice for all mid and hi-range speaker cabinets.

Features IRIS-Net Compatable Control SystemRemote control and supervision of up to 100 amplifiers via one (or multiple) PCs running IRIS-Net software. Central supervision of all amplifiers and connected loudspeakers. State-of-the-art signal processing (Filter, Delay, Level, Dynamic). Display of the acoustical response of EV speakers in real-time (RACE). Integration with life-safety systems and control of external equipment. Exceptional audio performance and extreme reliability. DSP version of the legendary EV P3000 amp. 2x1300 watts into four ohms; 2x1800 watts into two ohms. Loudspeaker outputs on Neutrik Speakon® NL4 connectors.

The Dx38 is a two-in, four-out loudspeaker processor. A dynamic range of 115 dB, for highest audio performance; 48-bit filter algorithms 24-bit A/D and D/A conversion. Real-time control and configuration via front panel or PC interface with RACE software supplied. RS-232, MIDI interfaces are standard. RS-485 bus for networking is optional. Contact-closure interface is optional.