Xlc118/Xlci118

The X-Line Compact Groundstack features a rigging attachment position to allow a column of an X-Line Compact Loudspeaker Array to be Groundstacked and tilted to obtain the desired sound coverage.

Dolly for the XLC Family of Products

Bottom Grid Kit for Xlc systems. EXTRA GRID REQUIRED AND SOLD SEPARATE.

Grid Extender for the Xlc Family of Products

The Xlc127+ loudspeaker is a component used in multiples to create a XLC line array. An XLC array can use a minimum of four cabinets, and a reasonable array uses six to eight boxes, with a maximum of 16 for larger arenas. The three-way, axis-asymmetric design includes a single EV DL-12 low-frequency, mid-bass woofer optimized for this cabinet. Two 6.5-inch, horn-loaded drivers in a vertical array comprise the mid-frequency bandpass. The XLC127+ uses two ND6 (three-inch voice-coil) neodymium compression drivers loaded on two Hydra™ plane wave generators. With a horizontal coverage of 120 degrees, the XLC system accurately covers wide areas while maintaining excellent imaging and lobe-free coverage. The XLC127+ is equipped with an internal x-over for mid-bass and high-frequency to allow for either biamp or triamp operation. The Xlci version is designed for permanent installation applications with specially designed mounting hardware for easy cost-effective hanging.

The P3000 delivers 1,800 watts per channel at two ohms. Neutrik Speakon® output connectors allow use of heavy-gauge speaker wire for low-loss connections. Extremely low dynamic distortion ensures excellent sound quality. Three-rack spaces.

Electro-Voice’s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg), it is both powerful and lightweight. The CP3000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's combination of reliability and pleasing, rich sound make it the the first choice for all mid and hi-range speaker cabinets.

Features IRIS-Net Compatable Control SystemRemote control and supervision of up to 100 amplifiers via one (or multiple) PCs running IRIS-Net software. Central supervision of all amplifiers and connected loudspeakers. State-of-the-art signal processing (Filter, Delay, Level, Dynamic). Display of the acoustical response of EV speakers in real-time (RACE). Integration with life-safety systems and control of external equipment. Exceptional audio performance and extreme reliability. DSP version of the legendary EV P3000 amp. 2x1300 watts into four ohms; 2x1800 watts into two ohms. Loudspeaker outputs on Neutrik Speakon® NL4 connectors.

The Dx38 is a two-in, four-out loudspeaker processor. A dynamic range of 115 dB, for highest audio performance; 48-bit filter algorithms 24-bit A/D and D/A conversion. Real-time control and configuration via front panel or PC interface with RACE software supplied. RS-232, MIDI interfaces are standard. RS-485 bus for networking is optional. Contact-closure interface is optional.

EV engineers have defined a new group of compact line array elements, the XLC. It is comprised of three components - XLC 127+ full-range with ND6-16 large-format, high-frequency transducers and two subwoofer systems. The XLC 118 sub cabinet uses an EVX-180B, and the XLC 215 uses two DVX3150’s. Both are true sub-bass systems designed for high-level, extended low-frequency output. They share the same enclosure footprint and rigging is identical to the other XLC systems, allowing flexible subwoofer integration with full-range arrays requiring extended low-frequency response. With a height 1.5 times that of the XLC 127+, a subwoofer array can be flown side-by-side with column appearances similar to the main array using a ratio of two subs for every three full-range boxes. Subwoofer systems can also be placed at the top or bottom of full-range arrays for seamless, arrayed, four-way system integration. Designed for use in groups of two or more, the subwoofer delivers predictability and control. Combined with an advanced integrated rigging system, one-man installations are also possible. The subwoofer systems can also be ground-stacked. Ideal for applications ranging from live reinforcement, to performing arts venues, to houses of worship, to sports facilities,  XLC provides the power to make it happen. XLC delivers unprecedented performance, particularly in difficult acoustic environments.